Sign In | Join Free | My xpshou.com
China HK UPPERBOND INDUSTRIAL LIMITED logo
HK UPPERBOND INDUSTRIAL LIMITED
Best One-stop Service Partner
Verified Supplier

13 Years

Home > Molasses Tobacco Machine >

200kg/h Rolling Process Recon Tobacco Sheet Production Line Machine Equipment

HK UPPERBOND INDUSTRIAL LIMITED
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

200kg/h Rolling Process Recon Tobacco Sheet Production Line Machine Equipment

Brand Name : UPPERBOND

Certification : CE

Place of Origin : CHINA

MOQ : 1 Set

Price : Negotiation

Supply Ability : 1000sets/year

Delivery Time : 60 Works Dates

Packaging Details : Wooden case

Condition : New

Color : Metallic

Production : 200kgh

Relative humidity : ≤85%

Port : Guangzhou

Steam consumption : ≥600kg/h P >0.8MPa

Contact Now

200kg/h Rolling Process Recon Tobacco Sheet Production Line Machine Equipment

Introduction:

Rolling Process Reconstituted(Recon) Tobacco Sheet Production is one complete group of equipment which makes full use of tobacco waste such as tobacco stems, powder and dust etc. produced in cigarette manufacturing process. It adopts special technical recipe and flow to finally remake the waste into tobacco Sheet filament.

This production line has the advantages of small investment, environment protection without pollution during manufacturing, reducing cigarette production cost greatly and producing great economic profit.

The production capability of Recon line has four specifications of 200kg/h,400kg/h,600kg/h,800kg/h.

The recon line consist of raw material purifying system, grinding and storing system, powder and liquid material proportioning system, rolling, drying and cutting system, secondary drying and crimping system and the electronic control system.

Main technical parameter:
1,Pretreatment production capacity (before grinding)
2,Production capacity of finished products: 200kg/h (with the moisture of 13%)
3,Thickness of the cut-recon: 0.13± 0.02mm (which can be adjusted by the requirement)
4,Length of the cut-recon: 30~50mm (which can be adjusted by the requirement)
5,Width of the cut-recon:1.0±0.1mm
6,Moisture rate of the finished products:(13±1)%


Working condition:
1,The quality of the raw material should meet to the relevant industry standard, in which the moisture rate < 19%.
2,Proportion rate of tobacco stem and powder material: tobacco stem from 30% to 60%, tobacco powder from 40% to 70%.
3,Environmental temperature:10~45℃
4,Relative humidity: ≤85%
5,Altitude above the sea level:
6,Power supply:3N~60Hz/TN-S,380±10%V,60Hz±1Hz
7,Consumption of compressed air:≥25m3/h     P =0.4~0.6MPa
8,Steam consumption:≥600kg/h    P >0.8MPa
9,Water consumption:≥200kg/h     P =0.2~0.3MPa
10,Net height of the factory:6.5m
 
Requirement of the technical flow and equipment function
System composition:
The LB recon line consist of raw material purifying system, grinding and storing system, powder and liquid material proportioning system, rolling, drying and cutting system, secondary drying and crimping system and the electronic control system.
Technical flow and equipment function:
1,Raw material purifying system
This section will purify and pre-dry the raw material.
1)The raw material mesh should be 2--80mesh after sieving.
2)The moisture should be not more than 10% after pre-drying.
The capability in this section is 800kg/h.

2,Grinding and storing system
In this section, the material will be grinded to micro-powder.
1) After grinding, the material of 80~120 mesh will occupied more than 85%, and the capability here will be 400kg/h.

 3,Powder and liquid material proportioning system
This section will complete the powder and the liquid proportioning and mixing.
1)In this section, the material proportioning and mixing will finished by several batches, and the moisture rate will be 30~40%.

4,Rolling, drying and cutting system.
In this section, the material will be rolled to sheet and dried, then cut to tiny sheet.
1)The length of the cut-recon is 30~50mm with 1mm width, which will satisfy the technical requirement of the post-processing. The moisture rate is 17~22%.
5,Secondary drying and crimping system 
1)In this section, the cut-recon will be dried for the second time, and then become the finished product. The moisture of the end product is 13%±1%. 

6,Electronic control system
The electronic system is the on-site control system, which will control the whole line automatically. The seller will provide the needed sensor/meter and the PLC/HMI.

 
 

Product Tags:

tobacco packing machine

      

molasses machine

      
China 200kg/h Rolling Process Recon Tobacco Sheet Production Line Machine Equipment wholesale

200kg/h Rolling Process Recon Tobacco Sheet Production Line Machine Equipment Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: HK UPPERBOND INDUSTRIAL LIMITED
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2024 xpshou.com. All rights reserved.